Wall Remote Series Architect & Engineering Specs WR-1 The remote control unit shall have two rotary potentiometers for adjusting DC level control on Ashly products. The unit shall connect to the host device using low gauge wire. The unit shall have clear windows for insertion of user-defined labels. The unit shall mount in a standard US electrical wall box. The unit shall be an Ashly WR-1. WR-1.1 This shall be a remote control unit with one rotary potentiometer for DC adjustment of level on Ashly products equipped with VC ports (10k Ohms). The unit shall have a removeable 3-pin Euroblock connector mounted on the rear and shall connect to the host device using low-gauge, 3-conductor STP (Sheilded Twisted-Pair) wire. The unit shall mount in a standard single-gang US electrical wall box and shall be supplied with a Decora-style wall plate. The unit shall be white and have a printed "Level" label, over which user labeling may be placed. The unit shall have a 5-year warranty when purchased in the U.S.. No other unit shall be acceptable unless all specifications herein are verified through an independent agent. The unit shall be an Ashly WR-1.1 WR-1.5 The remote control unit shall use a four position rotary switch to select Presets 1-4 on an Ashly product. The unit shall have a rotary potentiometer for adjusting DC level control on an Ashly product. The unit shall connect to the host device using low gauge wire. The unit shall have clear windows for insertion of user-defined labels. The unit shall mount in a standard US electrical wall box. The unit shall be an Ashly WR-1.5. WR-2 The remote control unit shall use four lockout pushbutton switches to select Presets 1-4 on an Ashly product. The unit shall connect to the host device using low gauge wire. The unit shall have clear windows for insertion of user-defined labels. The unit shall mount in a standard US electrical wall box. The unit shall be an Ashly WR-2. WR-5 The programmable remote control unit shall use serial data communications to control Ashly products. The unit shall have six programmable LED function buttons and two up/down buttons with adjacent numeric LED display for adjusting parameters. The unit shall connect directly to it’s host unit using low gauge four conductor wire and be powered from that unit or from an external Ashly RPS-18 in-line power booster. The unit shall be programmed using Ashly Protea NE Software, and offer control of preset recall/scroll, channel mute, zone source selection, individual channel level, matrix point level, and logic output if available. The unit shall have clear windows for insertion of user-defined function button labels. The unit shall mount in a standard US electrical wall box. The unit shall be an Ashly WR-5. RD-8C, RW-8C Remotes Architect & Engineering Specs RD-8C The programmable remote shall control input or output or matrix mixer output levels in an Ashly product that has Protea DSP and a serial data port. Each 45mm fader shall be assignable to one or more host devices’ gain functions. Each fader shall have an On/Off button with LED. One Master fader shall control the levels of all other faders and have an On/Off button. The unit shall connect directly to its host using low gauge wire and be powered from that unit. The unit shall be programmed using Ashly Protea NE Software. The unit shall be a free-standing desktop model with dimensions of 7.3”W x 3.4”H x 1.6”D (185mm x 87mm x 41mm), and weigh 1.4 lbs (0.63kg). The unit shall be an Ashly RD-8C. RW-8C The programmable remote shall control input or output or matrix mixer output levels in an Ashly product that has Protea DSP and a serial data port. Each 45mm fader shall be assignable to one or more host devices’ gain functions. Each fader shall have an On/Off button with LED. One Master fader shall control the levels of all other faders and have an On/Off button. The unit shall connect directly to its host using low gauge wire and be powered from that unit. The unit shall be programmed using Ashly Protea NE Software. The unit shall be a wall-mount model with dimensions of 7.94”W x 4”H x 0.8”D (202mm x 103mm x 20mm), weigh 1 lb (0.45kg), and fit in a standard 4-gang US electrical wall box. The unit shall be an Ashly RW-8C.